Faculty Members
Prof. Rajat B. Dave
Assistant Professor
M.E, B.E
Area of Interest
Computer Aided Design, Production Engineering, Industry Internet of Things, Quality and Reliability Engineering, Material Science and Metallurgy, Measurement and Metrology, Engineering Graphics, Design of Experiments
Majors Degrees
-
Ph.D.
Professional Experience
Research Papers
-
Published and presented a paper on “Review of Experimental and F.E. Analysis of Centrifugal Pump Impeller (Sand Casting)” by Mr. Rajat B. Dave, Prof. A. R. Patel. • Paper Published in International Journal of Scientific Computing (ISSN: 0973-578X), Volume6, Number-2, July-December 2012 • Paper Presented at VVP ITES Conference-2012, (International Conference on Innovative Technologies in Engineering and Sciences), In Association with Gujarat Technological University, Ahmedabad, 22nd – 23rd December 2012, Organized by V.V.P. Engineering College, Rajkot, Gujarat, India.
-
Published and presented a paper on “A Review on Effect of Process Parameter on Cutting Force, Surface Roughness and Material Removal Rate in High Chrome Harden Steel Using Advance Cutting Tool Inserts” by Mr. Sudarshan Rathod, Mr. Rajat B. Dave, Mr. Riddhish R. Thakore. • Paper Published in (ISSN: 2321-5747) • Paper Presented at International Conference on Emerging Trends In Scientific Research – 2015 (ICETSR-2015), at C. U. Shah College of Engineering and Technology, C. U. Shah University, Wadhwan City-363030, Gujarat, India.
-
Published and presented a paper on “Review of Solidification Analysis and Optimization of Centrifugal Pump Impeller (Sand Casting)” by Mr. Rajat B. Dave, Prof. A. R. Patel. • Paper Published in (ISBN: 978-81-925650-0-2) • Paper Presented at National Conference on Innovative & Emerging Technologies (NCIET-2013), 24th – 25 th January 2013, Organized by Smt. S. R. Patel Engineering College, AT & Po. Dabhi, Ta. Unjha-384170, Dist. Mehsana (North Gujarat)
-
Published and presented a research paper on “Making Decision Through Process Capability Index for Short and Long Term” by Mr. Riddhish R. Thakore, Mr. Rajat B. Dave. • Paper Presented at AICTE Sponsored National Conference on “Recent Advances in CAD/CAM/CAE (NCRACCC 2015)”, 7th August 2015, Organized by Department of Mechanical Engineering, C. U. Shah College of Engineering and Technology, C. U. Shah University, Wadhwan City-363030, Gujarat, India.
-
Published and presented a review paper on “An Application of Lean Manufacturing Principles, Tools and Techniques in Industry” by Dr. M. N. Qureshi, Dr. T. N. Desai, Mr. N. D. Chuhan, Mr. Rajat B. Dave. • Paper Presented at AICTE Sponsored National Conference on “Recent Advances in CAD/CAM/CAE (NCRACCC 2015)”, 7th August 2015, Organized by Department of Mechanical Engineering, C. U. Shah College of Engineering and Technology, C. U. Shah University, Wadhwan City-363030, Gujarat, India.
-
Mr. K.S.Banker, Mr. A.D. Oza, Mr. R.B. Dave, “Performance Capabilities of EDM machining using Aluminum, Brass and Copper for AISI 304L Material”. International Journal of Application or Innovation in Engineering & Management, (ISSN 2319 – 4847), Volume 2, Issue 8, August 2013
-
Mr. Riddhish R. Thakore, Mr. Rajat B. Dave, “A Review: Potential Failures in Grinding Process of Bearing Rings and its Solution”. IJERT (ISSN 2278 – 0181),Volume 3, Issue 11, November – 2014.
-
Mr. Hardik Panchal, Mr. Rajat B. Dave, “A Review on Effect of Process Parameter on Surface Roughness & Material Removal Rate for Machining Hardened Steel using Advance Tool Material”. TIJER (ISSN 2349 – 9249), Volume 1, Issue 5.
-
Mr. Riddhish R. Thakore, Mr. Rajat B. Dave, “A Case Study: A Process FMEA Tool to Enhance Quality and Efficiency of Bearing Manufacturing Industry”. SJET (ISSN 2347-9523), Vol.-3, Issue-3, Apr-May 2015.
-
Mr. Hardik Panchal, Mr. Rajat B. Dave, “Effect of Cutting Parameter on Surface Roughness and MRR for Machining High Chrome Steel using CBN 7025 Tool Material”. International Journal of Innovative Research in Technology, (ISSN 2349–6002), Volume 2, Issue 2, July 2015.
-
Mr. Sudarshan Rathod, Mr. Rajat B. Dave, Mr. Riddhish R. Thakore, “Experimental investigation for nitride ceramic cutting insert for material removal rate on High chrome Steel”. International Journal for Scientific Research & Development (ISSN 2321-0613), Apr-May 2016.
-
Mr. Hardik Patel, Mr. Rajat B. Dave, “A Review on Influence of Process Parameters and Electrode’s Material in EDM Process”. International Journal for Innovative Research in Science & Technology (ISSN 2349 6010), Volume 3, Issue 9, Feb 2017.
-
Mr. Hemant Rao, Mr. Rajat B. Dave, Mr. Riddhish R. Thakore, “Optimization of CNC End Milling Process Parameters for Aluminium 6061 Alloy using Carbide Tool Material by Design of Experiments”. International Journal for Innovative Research in Science & Technology (ISSN 2349 6010), Volume 3, Issue 11, April 2017
-
Mr. Hardik Patel, Mr. Rajat B. Dave, “Experimental Analysis of Machining Parameters for EDM of AISI D3 Steel using Copper-Silver Alloy Electrode”. International Journal for Scientific Research & Development (ISSN 2321 0613), Volume 5, Issue 2, April 2017.
-
Harishkumar Parmar, Mr. Riddhish Thakore, Mr. Rajat Dave, “A Review on Alloy Steel Welded by Plasma Arc Welding and Gas Tungsten Arc Welding for Comparative Study of Mechanical Properties”. International Journal of Scientific Research in Science, Engineering and Technology (ISSN: 2395-1990), Volume 3, Issue 8, November 2017.
-
Mr. Harishkumar Parmar, Prof. Riddhish Thakore, Prof. Rajat Dave, Prof Parthiv Trivedi, “Experimental Investigation of SS 304L Welded By Plasma Arc Welding and Gas Tungsten Arc Welding for Comparative Study of Mechanical Properties”. International Journal for Scientific Research & Development, Vol. 6, Issue 02, 2018, ISSN (online): 2321-0613, April 2018.
Articles Published
- Jignesh Doshi, Bhushan Trivedi:
-
National level paper presentation, Feb 2009 Presented Paper on " Efficient Wind Mill: A View" And secured 3rd position at National level at U.V.P.C.E. Ganpat University, Kherwa-382711.
-
Certified SolidWorks Professional
Books
- Fundamentals of Computers
Graduate Level
-
Computer Aided Design, Production Engineering, Industry Internet of Things, Quality and Reliability Engineering, Material Science and Metallurgy, Measurement and Metrology, Manufacturing Processes, Engineering Graphics
Postgraduate Level
-
Advance Material Technology, Design of Experiments, Mechanics of Metal Forming, Flexible Manufacturing System, Robotics and Control
Majors Degrees
-
M.E. Production Engineering - GTU(2011-2013)
-
B.E. Mechanical Engineering -NMU(2006-2009)
-
Diploma Mechanical Engineering -TEB(2004-2006)
Academic
-
Total academic experience is of 13 years.
Seminars/Workshop Conducted
-
Organized two days technical workshop as a main coordinator on “Application of SPSS in Advance Manufacturing” from 29 March 2016 to 30 March 2016
-
Organized one day technical webinar as a faculty coordinator on “Advancements in Adhesive Technology” on 21 August 2020
Seminars/Workshop Attended
-
Attended two days workshop on “Patenting in Engineering” organized by Gujarat Technological University, Ahmedabad, from 24 September 2011 to 25 September 2011, at Science City, Ahmedabad.
-
Attended three days workshop on “Hands on Experience on CNC-Machines” organized by Mechanical Engineering Department of Shankersinh Vaghela Bapu Institute of Technology (SVBIT-BGKV), from 05 November 2012 to 07 November 2012.
-
Attended one day workshop on “Strategic Innovation in Academia” organized by SVBIT, Gandhinagar and Sponsored by Gujarat Technological University, at BGKV Campus on 06 April 2013.
-
Attended three days workshop on “Application of Design of Experiments (DOE) in Engineering Practice”, organized by the Department of Mechanical Engineering ofankalchand Patel College of Engineering, Visnagar from 19 July 2013 to 21 July 2013.
-
Attended one day workshop on “Voyage on Exploration of Automobile Engineering Components” organized by Mechanical Engineering Department of Shankersinh Vaghela Bapu Institute of Technology (SVBIT-BGKV) on 23 October 2013.
-
Attended two days National workshop on “Research Methodology”, organized by Department of Civil Engineering, SVBIT and sponsored by Gujarat Council on Science and Technology, Government of Gujarat, from 12 December 2014 to 13 December 2014 at SVBIT-BGKV.
-
Attended three days workshop on “MiniTab-Sharpening Your Skills in Statistical Applications” organized by Mechanical Engineering Department of Shankersinh Vaghela Bapu Institute of Technology, Gandhinagar from 05 January 2015 to 07 January 2015.
-
Attended one day workshop on “Hands on Pedagogy” organized by Center of Creative Learning, IIT Gandhinagar on 17th April 2019.
-
Attended one day workshop on “Intellectual Property Rights Awareness” organized by Department of Electronics and Communication Engineering, SVBIT, Gandhinagar on 01st July 2019.
-
Attended Human Resource Development workshop FEEL (Facilitating Excellence in Effective Leadership) at R. C. Patel Institute of Technology, Shirpur - 425405, Maharashtra, from 01 February 2007 to 07 February 2007, governed by College for Leadership and Human Resource Development (CLHRD), Mangalore - 575002.
-
Attended Human Resource Development workshop FEEL (Facilitating Excellence in Effective Leadership) at R. C. Patel Institute of Technology, Shirpur - 425405, Maharashtra, from 01 August 2007 to 07 August 2007, governed by College for Leadership and Human Resource Development (CLHRD), Mangalore - 575002.
-
Excellence of center award from LJIET 2013
-
Main Coordinator of Renewable Center of Excellence- RECOE
-
Project of Solar Powered Tree in campus – generate power
-
Project of Oxygen concentration in campus during covid
-
Project of Roti maker with using of IOT
Contact
LJ Institute of Engineering and Technology,
LJ Campus, Near Sarkhej-Sanand Circle,
Off. S.G. Road, Ahmedabad-382210
Phone: 7096660382
Email: info_iet@ljku.edu.in